Home

About us

Products

Hydraulic pump Travel motor final drive Swing motor Main control valve Hydraulic hammer

News

Paymet Shipping Privacy policy

English/

português/

Русский язык

Product
Product Detail

K1025496 K3V112DTP1T9R-9NF9-V DX255 DX255LC

k1025496-k3v112dtp1t9r-9nf9-v-dx255-dx255lc

Product Detail

Flow rate: 192 lpm (51 gpm) at 1,800 rpm
Maximum operating pressure: 35 MPa (5,076 psi)
Input speed: 1,800 rpm
Displacement: 112 cm³/rev (6.84 in³/rev)
Weight: 90 kg (198 lbs)

The specifications for the Doosan excavators that use this pump, such as the DX255 and DX255LC, will vary depending on the model year and configuration. However, here are some general specifications for these excavators:

Operating weight: DX255: 24,500 kg (54,000 lbs) / DX255LC: 25,200 kg (55,500 lbs)
Engine power: 128 kW (172 hp)
Bucket capacity: DX255: 1.1 - 1.3 m³ (1.4 - 1.7 cu. yd) / DX255LC: 1.0 - 1.2 m³ (1.3 - 1.6 cu. yd)
Max digging depth: DX255: 6,560 mm (21 ft 6 in) / DX255LC: 6,940 mm (22 ft 9 in)
Max digging reach: DX255: 9,840 mm (32 ft 3 in) / DX255LC: 10,150 mm (33 ft 4 in)

Again, these are just general specifications, and the specifics will depend on the exact model and configuration of the equipment.

K1025496 K3V112DTP1T9R-9NF9-V DX255 DX255L

No comment

Previous : Hot sale K3V112DTP-9T8L main pump | OEM aftermarket new Next : YM10V00005F1 K7V63DT-112R-0E13

Product Detail

K1025496 K3V112DTP1T9R-9NF9-V DX255 DX255LC

Flow rate: 192 lpm (51 gpm) at 1,800 rpm
Maximum operating pressure: 35 MPa (5,076 psi)
Input speed: 1,800 rpm
Displacement: 112 cm³/rev (6.84 in³/rev)
Weight: 90 kg (198 lbs)

Operating weight: DX255: 24,500 kg (54,000 lbs) / DX255LC: 25,200 kg (55,500 lbs)
Engine power: 128 kW (172 hp)
Bucket capacity: DX255: 1.1 - 1.3 m³ (1.4 - 1.7 cu. yd) / DX255LC: 1.0 - 1.2 m³ (1.3 - 1.6 cu. yd)
Max digging depth: DX255: 6,560 mm (21 ft 6 in) / DX255LC: 6,940 mm (22 ft 9 in)
Max digging reach: DX255: 9,840 mm (32 ft 3 in) / DX255LC: 10,150 mm (33 ft 4 in)

Again, these are just general specifications, and the specifics will depend on the exact model and configuration of the equipment.