China A10VG 63DA1D3L/10R-NSC10F015SP hydraulic pump | Partsdic®

China A10VG 63DA1D3L/10R-NSC10F015SP hydraulic pump | Partsdic®

A10VG 63DA1D3L/10R-NSC10F015SP hydraulic pump | Partsdic®
The "NSC10F015SP" designation refers to the mounting type, porting, and shaft end configuration of the pump. It specifies that the pump has a flange-mounted, centering pin with four fixing holes and a shaft with an SAE-C spline. The specific configuration may vary based on the manufacturer's specifications and customer requirements.
A10VG, 63DA1D3L/10R-NSC10F015SP, hydraulic pump | Partsdic®

At the core of the A10VG 63DA1D3L/10R-NSC10F015SP pump is its axial piston design, which ensures efficient fluid displacement and optimal power delivery.


The pump has a displacement of 63 cm³ per revolution, indicating the volume of fluid it can deliver with each revolution. This displacement allows for a wide range of applications, from small-scale machinery to heavy-duty equipment.

The "DA1" in the product code refers to the control device of the pump. In this case, it indicates a pressure compensator with adjustable swivel angle, providing precise control over the hydraulic system. The adjustable swivel angle allows operators to modify the pump's flow rate and pressure according to the specific requirements of the application.

The "D3" designation in the product code represents the nominal pressure of the pump. In this case, it signifies a nominal pressure of 350 bar (5075 psi), indicating the maximum pressure the pump can handle. This high-pressure capability makes the A10VG 63DA1D3L/10R-NSC10F015SP suitable for demanding applications that require robust performance and heavy lifting capacities.

The "L/10R" part of the product code indicates the pump's control type.


In this case, it signifies load-sensing control with pressure cut-off. Load-sensing control is a sophisticated feature that adjusts the pump's output based on the load demand of the hydraulic system. This results in energy savings, reduced heat generation, and improved overall efficiency. The pressure cut-off feature ensures that the pump shuts off when the system reaches the desired pressure, preventing unnecessary wear and tear.

The "NSC10F015SP" designation refers to the mounting type, porting, and shaft end configuration of the pump. It specifies that the pump has a flange-mounted, centering pin with four fixing holes and a shaft with an SAE-C spline. The specific configuration may vary based on the manufacturer's specifications and customer requirements.
63DA1D3L/10R-NSC10F015SP A10VG hydraulic pump | Partsdic®
WhatsApp
wechat
Line
Email
Skype
Telegram
X
Telegram
X
Line
X
Line